Call today for expert advice

Tel: 508-668-6044    Mon-Fri 9am - 5:00pm

Shopping Cart

0 item - $0.00

You have no items in your shopping cart.


NEW Pepetools IPS-25-PRO Programmable Digital Plating Rectifier- 25 Amp

  • Fully Programmable User-friendly “one button” intuitive programming
  • Part No:PEIPS-25-PRO

    Availability: In stock

    Quick overview

    The new Pepetools programable 25 Amp plating machine is the most advanced rectifier on the market
      Key Features
    • Fully Programmable User-friendly “one button” intuitive programming
    • Sequential Program Running Mode
    • Amp Meter Counter (Two Counters Permanent and Resettable)
    • Pulse Voltage mode
    • Includes Programmable Heater
    • Maximized Output Voltage Stability
    • Maximized Output Current Stability
    • Self-Restoring Internal Short Circuit Protection
    • Auto Detectable - Dual Voltage
    • Switchable Polarity (In process User Selectable)


    Internal short circuit protection and Self-Restore function:

    During the plating process, the work piece may accidentally touches the anode: the system will shut-down - those preventing sparking and damaging the work. The current is not flowing and no plating is taking place until the short is eliminated. Them the system then will self-restore and continue working with the preset values.

    Programmable functions:

    The fully programmable unit allows presetting up to five (5) unique programs.

    In each program, the operator is able to preset Voltage and Current values; plating time; engage or disengage pulse mode and set a delay time, if needed.

    Just set the values you require: Press Start Button. The unit will turn on and turn off at the pre-set time.

    Amp Meter (AE) functions:

    Optional Two (2) internal counters provide an important measuring function that allows user to properly maintain plating bath, regulate the thickness of the plating and also calculate the amount of material being used.

    If option selected the user will have access to both: Permanent and User Resettable Amp Meter counters.

    The permanent counter cannot reset and will accumulate the time for the live of the device.

    Sequencing functions:

    This combined function is a real breakthrough for the plating process in General.

    The sequencing option allows a series of plating sessions to run sequentially – in, by the user, selectable order.

    Jewelry Manufactures; Production Jewelry Shops and Artisan doing electro plating and/or electroforming will greatly benefit when using this Pepetools Power Supply.

    Flush Plating: Auto Mode (fully programmable device)

    Program 1: Set the Values for Electro cleaning Amps and Volts, Select – Reverse polarity.
    Set time. Approximate the time you will need to electro clean, rinse and acid dip.

    Program 2: Set the Values for Electro Plating Amps, Volts, and time you will need to plate.
    Select Sequencing Function:
    Set Sequence order: Program 1; Program 2

    Start program. The program(s) will run as you have preset them and will stop when it is done.
    You can repeat this program as many times as you will need.

    Having five (5) programs that you can sequence allows creating unique setting:

    For example - Setting for Rhodium; Setting for Yellow Gold; Setting for Pink Gold; Setting for Silver


    The fully programmable device offers the best solution for electroforming process. Sequential (staged) process provides an environment for a properly controlled crystal growth and the necessary density of the deposits – both factors contribute a shiny non-pitted finish.

    Solid State Architecture Reduces the Unit Size and Weight


    Parameters & Specifications

    Nominal input power 110VAC / 220VAC; 50/60Hz

    Input power range 105-132VAC / 200-248VAC; 50/60Hz


    Model - 25A /12VDC

    Phase Current at nominal output 6.0A/110V

    Power and voltage 3.0A/220V

    Efficiency >= 85% (Grater than 85%)

    Operating Temperature +5ºC - +40ºC (+40ºF - +104ºF)

    Dimensions 10x150x260mm (W x H x D)

    Weight 1.9kg (4.2 Lbs.)


    Adjustable voltage stabilization mode

    Output Voltage Adjustment 0.3 VDC - 12VDC

    Output Voltage Accuracy >= 99% (Grater than 99%)

    Output Voltage Adjustment:

    Resolution (step) 10mV

    Output Voltage

    Ripple <= 1% (Less than 1%)

    Noise <= 1% (Less than 1%)

    (Under maximum load)

    Output Terminal Voltage * Instability <= 1% (Less than 1%)

    *depends on time and external factors

    Adjustable load current stabilization mode

    Load Current Adjustment: 0.01 - 25A

    Load Current Accuracy <= 1%

    Load Current Adjustment

    Resolution (step) 10mA

    Load Current

    Ripple <= 1% (Less than 1%)

    Noise <= 1% (Less than 1%)

    (Under maximum load)

    Load Current Instability* <= 1% (Less than 1%)

    *depends on time and external factors

    Timer adjustment

    Maximum Time 9hrs 59min

    Adjustment Precision 1sec

    Pulse Voltage mode

    Positive / Negative Pulse Duration 1sec - 90min

    Adjustment Precision 1sec

    Heater Input / Output

    Heater Power Nominal 140W (by Nominal Input)

    Temperature units (user defined) Centigrade / Fahrenheit

    Temperature Range 1 ºC – 85ºC / 33 ºF – 185ºF

    Temperature Adjustment

    Resolution (step) 1ºC - 1 ºF

    Temperature Adjustment Accuracy +/- 1ºC - +/- 2ºF


    Information Downloads

    Write your own review

    Weight (lbs) 5
    Free Shipping No
    Brand PepeTools
    Manufacturer PEPETOOLS
    Please wait...