This is a Quart of SyberKleen 2000 Aqueous Saponifier.
For best results use a 5-10% concentration of solution at a temperature of 120-150 F Works best in an Ultrasonic Cleaner Superior SyberKleen 2000 was formulated for the 21st century cleaning of electronic assemblies with surface mount and mixed technologies.
This is a concentrated detergent/saponifier formulated for the efficient removal of rosin soldering flux residues and other soldering contaminates from printed circuit boards, components, and other electronic assemblies. In a conveyorized in-line aqueous cleaning machine or soak tank cleaning system the Superior SyberKleen 2000 will provide excellent cleaning of assemblies, even to the highest ionic standards set forth by the electronics industry.
DIRECTIONS Superior SyberKleen 2000 was formulated to be versatile in its application techniques.
It can be used with conveyorized cleaning-equipment; soak tanks; and modified dishwasher/batch-cleaning units. For soak cleaning, a simple soak or dip tank can be used to remove any rosin or resin flux residues.
The tank should be constructed of stainless steel or high temperature plastics such as PVC or stress relieved polypropylene.
The solution make-up for the soak or dip tank should be 5-10% by volume of the concentrated detergent added to water.
For best results, a wash temperature of 50C/120F - 65C/150F is recommended.
The dwell time of the PCBs being cleaned will depend on the concentration of the flux residue on the boards or components.
After removal from the soak or dip tank, PCBs should be thoroughly rinsed with water to insure the complete removal of all solubilized and dispersed residue.
Spray rinsing is preferred for maximum cleanliness followed by a rinse in DI water, which will ensure excellent cleanliness levels and good electrical characteristics.